RACER – FD – Plug

USE: Light fixings to all concrete and masonry materials, hollow brick, porous concrete and lightweight building board

This KTS plug is suitable for universal use with wood and chipboard screws.

High quality polyamide (nylon) makes the plug resistant to the weathering and ageing.

This information should be regarded as general recommendations. More specifically, please note that these plugs and anchors may not be used for work subject to building inspections (e.g. for securing façade substructures, roofs etc.).

* Safety factor 5

Technical data FD – Plug
Article-No. / Small packing Packing unit Weight per packing unit
5 x 25 mm 1010502511 100 / 4.000 1,5 kg.
6 x 30 mm 1010602511 100 / 5.000 2,8 kg.
8 x 40 mm 1010802511 100 / 5.000 6,7 kg.
10 x 50 mm 1011002511 50 / 1.000 2,8 kg.
12 x 60 mm 1011202511 25 / 500 2,3 kg.
14 x 70 mm 1011402511 20 / 800 6,5 kg.
16 x 80 mm 1011602511 10 / 400 5,9 kg.
20 x 90 mm 1012002511 5 / 200 3,6 kg.

 

Testing FD – Plug
Material: NYLON (Polyamide 6)
Diameter mm 5 6 8 10 12 14 16 20
Length mm 25 30 40 50 60 70 80 90
Drilling diameter mm 5 6 8 10 12 14 16 20
Min. drilling depth mm 30 40 50 60 70 80 90 100
Min. installation depth mm 25 30 40 50 60 70 80 90
Screws Ø mm 2,5 – 4,0 3,5 – 5,0 4,5 – 6,0 6,0 – 8,0 8,0 – 10,0 10,0 – 12,0 12,0 – 14,0 16,0
Pull out tension value concrete (kN)* 0,50 0,75 2,18 7,20 2,00 3,00 4,00 5,50
Pull out tension value lime sandstone brick (kN)* 0,36 0,84 1,61 5,12 – – – –