EASY ISO – Insulation board dowel

USE: On concrete walls, bricks and other materials with high strength

The item consists of a plastic dowel and a spreader nail made of special plastic. It is suitable to attach hard foam boards.

The KTS insulation board dowel is inserted in the drill hole and the spreading nail is then hammered into the dowel. The dowel spreads and remains fitted tightly to the drill hole due to the spreading pressure.

This information should be regarded as general recommendations. More specifically, please note that these plugs and anchors may not be used for work subject to building inspections (e.g. for securing façade substructures, roofs etc.).

Technical data ISO – Insulation board dowel
Ø 50 mm 10 x 70 mm 10 x 90 mm 10 x 110 mm 10 x 130 mm 10 x 150 mm
Article-No. 1821007031 1821009031 1821011031 1821013031 1821015031
Packing unit Pieces 250 250 250 250 250
Weight per packing unit 2,0 kg. 2,38 kg. 2,63 kg. 2,88 kg. 3,13 kg.
ISO Disc Ø 90 mm
Article-No. 1820001090

 

Testing ISO – Insulation board dowel
Diameter mm 10 10 10 10 10
Lenght mm 70 90 110 130 150
Drilling Ø mm 10 10 10 10 10
Min. drilling depth mm 40 60 60 60 60
Insulating thickness mm 30 – 40 50 – 60 70 – 80 90 – 100 110 – 120
Pull out tension value concrete (kN) 0,70 0,70 0,70 0,70 0,70
Pull out tension value lime sandstone brick (kN) 0,55 0,55 0,55 0,55 0,55